Guide

Crane mat guide

What crane mats do, how big and heavy they are, which timber to choose, and what to have ready before you order.

What a crane mat does

A crane mat spreads the load from crawler tracks or outrigger pads over a larger area of ground, so the ground underneath carries less pressure. Mats also give a level working surface and protect the ground from damage. Timber mats are laid side by side, or in layers, to form a working platform or an access road.

How many mats you need, how they are laid and whether they are enough for a given lift is an engineering decision. It comes from your lift plan or temporary works engineer, not from the mat supplier.

Standard sizes

Width and depth are confirmed with each quote.

Length
3,000 – 8,000 mm, or custom
Width
Typically 1,000 mm
Depth
200 mm
Timber
Ekki/Azobé, Okan, Dabema or mixed

Longer mats spread a load over more ground. Shorter mats are lighter to handle and easier to transport. Your engineer’s design sets the length.

How much does a crane mat weigh?

Plan unloading, handling and lorry loads around these figures.

Standard crane mat lengths with approximate weights
LengthApprox. weight, 200 mm deepQuote
3 m≈ 684 kgQuote
4 m≈ 912 kgQuote
5 m≈ 1,140 kgQuote
6 m≈ 1,368 kgQuote
7 m≈ 1,680 kgQuote
8 m≈ 1,920 kgQuote

Width typically 1,000 mm. Approximate weights for Ekki/Azobé mats. Okan and Dabema mats are lighter, and moisture content changes the weight, so confirmed weights come with your quote. Other sizes on request.

Ekki, Okan or Dabema?

Species and availability are confirmed with each quote.

Ekki / AzobéThe standard timber for crane mats. Ekki is one of the densest and hardest commercial hardwoods, and its interlocked grain resists splitting under tracks and outriggers. It is naturally durable outdoors and in wet ground without chemical treatment.
OkanA dense, hard West African timber with durability close to Ekki. Okan is used for the same heavy work and is a sound choice when Ekki is in short supply.
DabemaA lighter and more economical hardwood. Dabema suits access routes, laydown areas and lighter lifts, where the full density of Ekki is not required.
Mixed speciesMats can be built from a combination of these timbers to balance strength and cost. The species in each mat are agreed and stated on your quote.
How our timber is sourced

Before you order

RGS supplies to the agreed specification. Mat selection and site suitability stay with your project team.

  • The mat specification from your lift plan or temporary works engineer
  • Mat length and quantity
  • Timber preference, or ask us to advise
  • Delivery site, access and date
  • How the mats will be unloaded and moved on site
  • Documents your project needs

From 30 December 2026, timber placed on the EU market must be traceable to the land it grew on, with a due-diligence statement. If your mats are for an EU project, tell us and we’ll confirm the documents with your quote.

Need crane mats?

Send the lengths, how many, and where they’re going. We’ll come back with a written quote.

or email sales@rgsmats.com